Cart 0

mSetup Configuration Utility

 The mSetup utility is used to configure the camera's settings.  Once mSetup is open, insert a memory card into the Mobius Camera, and connect it to a PC via a USB cable. Once recognized, the camera will appear in the window at the top. Click on it to highlight it, then select all desired options. Once all options are selected, click 'Set Parameters'. A confirmation message will display, at which time the camera can be disconnected.

mSetup Basic Settings TabThe 'Basic Settings' tab of mSetup provides the following options:

  • Sync Date/Time - When this option is set to 'Yes', the Mobius camera's date/time will by sync'd to the PC's date/time when 'Set Parameters' is clicked.
  • Lens Type - This option compensates for the different type of glass used in the different lenses.
  • Artificial Light Frequency - Compensates for artificial lighting. 60 HZ for USA. 50 HZ for Europe.
  • Recording Indicator - Toggles whether or not the recording LED will flash.
  • USB Data Port Charging - Toggles charging over the USB port. This is frequently used when connecting to an Android device that is not capable of powering the camera.
  • Formatting For Cards > 32GB - Selects the file system for cards greater than 64GB when using the in camera formatting feature.
  • Date Format - Sets the date format for the on screen time stamp.  Year/Month/Day, Day/Month/Year, or Month/Day/Year.
  • Power On Default - Sets the mode that the camera will enter when powered on.
  • Power On Delay - Sets how long the power button must be pressed prior to the camera powering on. Setting it to delay will prevent accidentally powering on the camera.
  • Power Off Standby - Sets how long the camera will remain in standby mode prior to powering off.
  • Power On Auto Record - When enabled, the camera will automatically begin recording when powered on. When set to 'external', the camera will automatically power on and begin recording when it receives power over a USB cable. This is often used in dash camera setups.
  • Power Off Disconnect - When enabled, the camera will automatically stop recording and power off when it stops receiving power over a USB cable.
    mSetup Misc. Settings TabThe mSetup 'Misc. Settings' tab provides the following options:

    • Motion Detect - Toggles the camera's motion detection mode.
    • Motion Sensitivity - Determines how much motion is necessary to trigger recording.
    • Motion Timeout - Determines how long it will take before the camera stops recording when no motion is detected.
    • TV Video Out - Display mode and aspect ration options for video out cable.
    • Webcam Mode - Typically MJPG is used, however H.264 may provide better compatibility with older computers.
    • Rotate Webcam 180° - Flips the webcam output upside-down.

      mSetup Mode 1 and 2 tab.

      The 'Mode 1' and 'Mode 2' tabs, both provide the following options:

      • File Type - By default, the camera records video in .MOV format. However, it can be set to record in .AVI, .MP4, or .WAV. When set to .WAV, the camera functions like a voice recorder and records audio only.
      • Audio Recording - This setting turns on/off audio when recording video.
      • Video Time Stamp - Turns on/off the on screen time stamp.
      • Rotate Video 180° - This setting rotates the video 180°. It is used when mounting the camera upside-down, such as when using it as a dash camera with a suction cup mount.
      • Loop Recording - When loop recording is enabled, the camera will continuously record, even when the memory card becomes full. It does this by overwriting the oldest video files, with new ones. This is typically used in a dash camera setup.
      • Video Data Rate - Sets the maximum data rate. This will affect file size, but may not affect quality.
      • Video Clip Length - Sets the length of the video clips
      • WDR - Enabling WDR will improve video quality in low light or high contrast settings.
      • FoV - Adjusts the FoV via the camera's image sensor.
      • Video Resolution - Sets the video resolution for each mode.
      • Video Frame Rate - Sets the frame rate for each mode.
      • Time Lapse Video - Enables time lapse video.
        mSetup Photo Mode Settings.The mSetup 'Photo Mode' tab offers the following options:

        • Photo Time Stamp - Toggles on/off the photo time stamp.
        • Rotate Photos 180° - Flips photo upside down.
        • Photo Frame Size - Selects the photo size.
        • Time Lapse Photos - Toggles the time lapse photo feature, and sets time intervals.





          mSetup Advanced Settings Tab.The mSetup 'Advanced Image Settings' tab contains the following options:

          • Sharpness - Affects the overall sharpness of the image.
          • Exposure - Affects the overall darkness / lightness of the image.
          • Contrast - Adjusts the separation between the darkest and brightest portions of an image.
          • Saturation - Adjusts the image's intensity of color.
          • Color Options - Adjusts the color of the image from mono to vivid.
          • White Balance - Adjusts for lighting to make white objects appear white in the image.
          mSetup Firmware Update Tool

           mSetup can also be used to format memory cards, and most importantly, update the cameras firmware.  By clicking on the 'Tools' button in the main window, a second window will open.  This window gives the ability to download firmware updates, and then install them by selecting the desired firmware, and clicking on 'Install'.  mSetup will then give on screen instructions during the firmware update process.  If, for some reason, mSetup can not be used to update the firmware, then there is always the option of manually updating the firmware.




          Download link for mSetup configuration utility.